Automatic tire inflation system savings should be calculated from a fleet’s own fuel, tire, roadside-service, labor, and downtime records. This guide explains how to build a defensible baseline, run a controlled pilot, and avoid unsupported return-on-investment claims.
Where automatic tire inflation system savings can appear
An automatic tire inflation system (ATIS) supplies air to connected tires when pressure falls below the configured target. Depending on the installation, operating profile, and maintenance response, the measurable effects may appear in fuel consumption, tire removals, irregular wear, pressure-related roadside calls, inspection labor, and vehicle availability.
These outcomes are not fixed percentages. Route length, load, ambient temperature, existing tire-management discipline, wheel-end configuration, leak frequency, and driver response all affect the result. Use published research to identify what to measure, then use fleet records to calculate the business case.

Build a baseline before estimating ROI
Choose a representative period and record the same measures for each participating vehicle or trailer:
- Fuel: distance, fuel consumed, payload or duty cycle, and relevant route conditions.
- Tires: removals, casing condition, tread wear, repairs, pressure-loss events, and replacement invoices.
- Roadside service: service calls, towing, replacement parts, delay time, and documented causes.
- Labor: inspection, inflation, diagnosis, installation, and scheduled maintenance time.
- Availability: downtime and delivery disruption attributable to tire-pressure issues.
Normalize results by distance, vehicle utilization, or another consistent unit. A simple total without exposure data can make a busy vehicle appear worse than an underused one.
Use a transparent savings formula
Calculate each category separately:
- Fuel difference = comparable baseline fuel cost minus pilot fuel cost, adjusted for distance, load, and route.
- Tire difference = comparable baseline tire and casing cost minus pilot tire and casing cost.
- Roadside difference = avoided pressure-related service, towing, delay, and replacement costs supported by records.
- Labor difference = verified change in inspection and inflation time, less added system-maintenance labor.
- Net benefit = verified operating-cost difference minus installation, hardware, parts, training, connectivity, and maintenance costs.
Do not combine estimated benefits with confirmed costs as if they have equal certainty. Mark assumptions, document the source of every input, and show a range when operating conditions vary.
Design a representative ATIS pilot
Select vehicles that reflect the intended rollout: vehicle type, wheel positions, route profile, load, climate, maintenance location, and utilization. Define the target pressure and inspection procedure from the vehicle, tire, and system requirements. Keep a comparable control group when practical.
Before the pilot begins, decide who reviews alerts, how leaks are diagnosed, which events require a vehicle stop, and how maintenance actions are recorded. An ATIS can maintain pressure within its operating design, but it does not replace tire, valve, wheel, tread, damage, or load inspections.
Compare total lifecycle cost
Request a written quotation for the actual configuration. Include hardware, installation, wheel-end components, replacement parts, technician training, scheduled inspection, software or connectivity fees, warranty terms, and expected service support. If the proposed system uses the vehicle air supply, confirm compatibility and installation requirements before purchase.
A smaller fleet can still justify a pilot, while a larger fleet can still produce a weak result if its baseline and maintenance process are poorly controlled. Fleet size alone is not a reliable purchase threshold.
Related IntelliSafeAir resources
- Review the automatic tire inflation system
- Compare TPMS monitoring with automatic inflation
- Use the fleet tire safety framework
- Browse tire-pressure safety products
