Global distributor opportunities now under review Check your market
July 11, 2026

Tire Aging and Heat Degradation: A Safety Guide for Heavy-Duty Truck Fleets

intellisafeair

Low tire pressure roadside risk for heavy-duty commercial trucks

Tire Aging and Heat Degradation requires a structured safety approach: identify the operating condition, verify tire condition and pressure, and act before a warning becomes a roadside event. This guide focuses on practical fleet controls.

There is a stretch of Interstate 40 outside of Kingman, Arizona, where the pavement temperature hits 150 degrees Fahrenheit on a July afternoon. A truck running that route at Gross Vehicle Weight Rating is asking its tires to perform in conditions that accelerate aging faster than most fleet managers realize. The rubber compound in those tires is changing at a molecular level with every mile, and the heat is the main driver.

I have spent enough time around commercial tires to know that age is not just a number on a sidewall. It is a safety risk that develops silently. A tire that looks perfectly serviceable on the outside can have internal degradation that makes it dangerous.

What Happens to Rubber as a Tire Ages

Tire rubber is a complex blend of polymers, carbon black, sulfur, and various chemical accelerators. When the rubber compound is cured in the mold, the sulfur atoms form cross-links between the polymer chains. Those cross-links give the rubber its strength and elasticity. Over time, heat and oxygen break those cross-links in a process called thermo-oxidative degradation.

The result is a rubber compound that becomes harder and less flexible. An aged tire cannot absorb road impacts the way a fresh tire can. The internal belt edges experience higher stress concentrations, and the risk of belt separation goes up significantly.

Heat accelerates this degradation exponentially. For every 10 degrees Celsius increase in operating temperature, the rate of chemical degradation roughly doubles. A tire running on an underinflated axle in a hot climate is aging several times faster than the same tire under ideal conditions.

Tire Aging and Heat Degradation
Fleet operating context for tire aging and heat degradation.

The Danger of Low-Mileage Aged Tires

One of the most dangerous scenarios in fleet operations is the low-mileage aged tire. A truck that sits for extended periods, or runs short local routes, may have tires that look new in terms of tread depth but are five or six years old. The rubber has been degrading the whole time, just at a slower rate. The driver might check the tread, see plenty of rubber, and assume the tire is safe. It is not.

The National Highway Traffic Safety Administration has studied this extensively. Their research shows that tire age is an independent risk factor for tread separation, even when tread depth is adequate. A six-year-old tire has a significantly higher failure rate than a two-year-old tire with the same tread depth.

This matters for fleets that run seasonal equipment or have spare trailers that sit for weeks at a time. Those tires are aging faster than the odometer suggests.

Tire Aging and Heat Degradation: what fleet teams should evaluate

When reviewing tire aging and heat degradation, compare the vehicle configuration, actual operating conditions, tire or system requirements, inspection records, and the maintenance response expected when conditions change. Use the fleet tire safety framework to connect the finding to a practical next step.

Real-World Case Study: The Aged Tire That Caused a Preventable Accident

A regional fleet operating in the southeastern United States experienced a steer tire blowout on a truck that had been in service for only 18 months. The tire had 70 percent tread remaining. The driver lost control, the truck crossed the median, and the resulting accident cost the fleet over $200,000 in vehicle damage, cargo loss, and liability claims.

When the fleet’s maintenance team inspected the failed tire, they found that the tire’s DOT code showed it was manufactured seven years before the accident. The tire had been sitting in inventory for over five years before it was mounted on a truck. During those five years, the rubber compound degraded significantly, even though the tire was never run a single mile. The low operating mileage gave everyone a false sense of safety.

After this incident, the fleet implemented a strict tire age tracking policy. Any tire over four years old in inventory is now marked for disposal, regardless of appearance. Tires on trucks are tracked by installation date, and steer axle tires are replaced at the five-year mark without exception. In the three years since implementing this policy, the fleet has not had a single tire-related accident.

Inspection Techniques for Detecting Heat Degradation

Visual inspection alone is not enough to catch heat degradation. The damage starts from the inside out. But there are signs that an experienced eye can spot.

Cracking in the tread grooves: Small cracks at the bottom of the tread grooves are an early indicator of rubber hardening. If you see cracking in the grooves of a tire that still has good tread depth, the tire has aged significantly even if the mileage is low.

Sidewall weather checking: Fine cracks on the sidewall surface indicate ozone and UV exposure. While surface cracking alone is not necessarily a safety concern, extensive weather checking across the entire sidewall suggests the rubber compound has lost its flexibility.

Belt edge separation: When the belt edges start to separate internally, it sometimes shows as a visible bulge or depression on the tread surface. This is a sign of advanced degradation and the tire should be removed from service immediately.

Some fleets have started using ultrasonic thickness measurement tools to assess internal rubber condition. These tools measure the rubber hardness and can detect changes in compound stiffness that indicate aging. For fleets running large numbers of older tires, this technology can be a cost-effective screening method.

Tire Aging and Heat Degradation: evidence to record

Track tire aging and heat degradation with consistent measurements, service notes, and driver observations. A repeated pattern is more useful than a single reading because it helps maintenance teams distinguish a one-time condition from a developing tire or system issue.

Setting an Age-Based Replacement Policy

The Tire Industry Association recommends that tires over six years old be removed from service on commercial vehicles, regardless of tread depth or visible condition. Many large fleets adopt a more conservative five-year policy, especially for steer axle tires where failure has the most severe consequences.

Implementing an age-based policy requires tracking the tire’s manufacture date, which is encoded in the DOT number on the sidewall. The last four digits of the DOT number indicate the week and year of manufacture. A tire with DOT code 4320 was manufactured in the 43rd week of 2020. That tire is aged enough that many fleets would remove it from steer axle service, even if it has 70 percent tread remaining.

The cost of replacing a steer tire with usable tread is far lower than the cost of a steer tire blowout at highway speed. When a steer tire fails, the driver loses steering control. The truck can cross the median, roll over, or collide with other vehicles. The liability alone makes age-based replacement one of the most cost-effective safety investments a fleet can make.

Heat Management at the Fleet Level

Beyond age-based replacement, fleets can reduce heat degradation through operational choices. Running tires at the correct pressure is the single most important factor—underinflation increases sidewall flex and heat generation dramatically. A tire running at 80 psi instead of its recommended 110 psi can see a 20 to 30 percent increase in operating temperature.

Load management also matters. Overloaded axles generate more heat in the tire casing. A tire carrying 6,000 pounds of load on a steer axle rated for 5,500 pounds may look fine on a weight scale, but the tire is running hotter than it was designed to. Over time, that extra heat accelerates the aging process.

Speed is the third factor. At 75 miles per hour, a tire’s internal temperature is significantly higher than at 65 miles per hour. This is especially important for fleets running long-haul routes through hot climates where sustained high speeds are the norm.

Practical Temperature Monitoring for Fleet Operations

Fleets that want to move beyond estimation and into real data can use infrared temperature guns to check tire sidewall temperatures during routine stops. The measurement is simple: point the gun at the sidewall of each tire and record the temperature. A temperature difference of more than 15 degrees Fahrenheit between tires on the same axle usually indicates an underinflated tire or a bearing issue.

Some fleets integrate temperature logging into their pre-trip inspection process. Drivers are asked to record tire temperatures at the start of each shift and again at the first break. When temperatures climb significantly between checks, it signals that a tire is building excessive internal heat and may need to be pulled from service for inspection.

For fleets running automatic tire inflation systems like the IntelliSafeAir ATIS, temperature data becomes even more useful. These systems maintain consistent pressure automatically, removing underinflation as a variable. Any temperature spike that occurs despite proper pressure points the investigation toward mechanical issues like brake drag, bearing failure, or overloaded axles, allowing maintenance teams to diagnose problems before they cause a roadside failure.

The key is to start collecting data, even if it is just spot checks with an infrared gun. The pattern you see over the first month will tell you more about your fleet’s tire heat exposure than any technical specification sheet ever could.

What Temperature Threshold Are Your Tires Reaching on Their Hottest Route?

If you do not know the answer to that question, it is worth finding out. Temperature indicators are available that attach to the inner liner of a tire and record the peak temperature reached during operation. Running a few of these indicators on your hottest routes for one summer season will give you real data on whether your tire aging is occurring faster than expected. The investment is small, and the safety payoff can be substantial for any fleet running long-haul routes.

Tire Aging and Heat Degradation: practical next steps

A useful tire aging and heat degradation program ends with documented checks, clear responsibility, and follow-up based on evidence rather than assumptions. Review NHTSA tire-safety guidance alongside vehicle, tire-maker, and system-specific instructions before changing pressure settings or equipment.

Apply→